zł35.87
oCam - 5MP USB 3.0 Camera
ID: 561445
5906623437146
zł570.08
Tax included
zł463.48 tax excl.
The oCam supports plug-and-play by UVC compliant adapting the standard M12 lens with focal length of 6mm
Description
The oCam supports plug-and-play by UVC compliant adapting the standard M12 lens with focal length of 3.6mm. Direct memory access via USB 3.0 allows data to be written to main memory without going through the CPU. It reduces the CPU work load significantly.
This camera is not compatible with Android OS
Features
- Sensor: OmniVision OV5640 CMOS image sensor
- Lens: Standard M12 Lens with focal length of 3.6mm
- FOV: 65 Degree
- Image sensor size: 0.25inch (3673.6 μm x 2738.4 μm)
- Pixel size: 1.4 μm x 1.4 μm
- Shutter: Electric Rolling Shutter
- Interface: USB 3.0 Super-Speed
- Supported OS: Windows7/8/10, Linux, Plug-and-Play by UVC(USB Video Class) Protocol.
- Power: USB BUS Power (Rating : 5V/280mA)
- Operation Temperature: 0°C ~ + 70°C
- Camera Control: Brightness, Contrast, Hue, Saturation, White Balance
- Frame Rate:
- YUV : [email protected], 1920x1080@15fps, 1280x720@30fps, 640x480@120fps, 320x240@120fps
- MJPEG : 1920x1080@30fps, 1280x720@45fps, 640x480@30fps
- Depth : 30-35 mm (Variable length for Manual Focusing)
- Weight : 35gram approx. (Including frame)
Package includes
- oCam : 5MP USB 3.0 Camera
- Micro-USB3.0 Cable(Length : 400mm approx.)
561445
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
zł13.36
24h
Available quantity: 14
Available
The oCam supports plug-and-play by UVC compliant adapting the standard M12 lens with focal length of 6mm
zł570.08
24h
Available quantity: 1
Available
A set of four M12 lenses is an ideal choice to be used with oCam series cameras. Lens set without IR cut filter
zł427.28
24h
Available quantity: 1
Available
A set of four M12 lenses is an ideal choice to be used with oCam series cameras. Lens set with IR cut filter
zł401.80
24h
Available quantity: 1
Available
Other products in the same category (16)
A set of all sockets and connectors not pre-installed in the Odroid-C0 computer
zł15.42
24h
Available quantity: 8
Available
A set of four M12 lenses is an ideal choice to be used with oCam series cameras. Lens set without IR cut filter
zł427.28
24h
Available quantity: 1
Available
USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector
zł78.61
24h
Available quantity: 9
Available
7 pin GPIO ribbon cable (20 cm) for Odroid C4
zł20.05
5 weeks
No product available!
Pin strip straight in black, double-row, female with 2x20 layout, 2.54mm pitch and elongated legs (12mm). Thru-hole assembly (THT), often used to build GPIO modules for single board computers. PBD40S L
zł3.26
24h
Available quantity: 55
Available
Micro USB-DC Power Bridge Board for ODROID-XU4 users who use ODROID-VU7 or VU7plus. This bridge board is to supply separated 5V power to the ODROID-VU7 and VU7 Plus
zł19.90
24h
Available quantity: 4
Available
7" TFT LCD display with touch screen for Odroid C1+, C2, N2 and XU4 computers. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 1024x600 pixels. ODROID-VU7A Plus
zł710.77
5 weeks
No product available!
- The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
zł38.81
24h
Available quantity: 2
Available
Module with OV5647 sensor cooperating with ODROID-M1. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. Odroid M1 MIPI-CSI Camera Kit
zł149.00
24h
Available quantity: 3
Available
Kit for mounting the HDD in the Odroid M1 minicomputer. Hardkernel M1 SATA mount and cable kit
zł66.90
24h
Available quantity: 8
Available
IR Remote Controller - Works with the ODROID C1, C0, C2, N2, N2+, C4, HC4 on-board IR receiver
zł37.83
24h
Available quantity: 6
Available
This CR2032 allows the system to keep its onboard clock-time ticking when a battery or power supply is disconnected. This battery can keep the RTC running up to 3 years without external power supply. RTC Backup Battery
zł20.79
24h
Available quantity: 13
Available
A module with a USB connector that supports WiFi communication (two frequency bands 2.4GHz and 5GHz) and Bluetooth 2.1/3.0/4.2. Dedicated to Odroid minicomputers. Odroid WiFi Module 5BK
zł70.29
24h
Available quantity: 14
Available
H4 Mini-ITX Kit is a kit that allows the Odroid H4 computer to be mounted in standard mini-ITX cases, providing flexibility in creating compact computer systems. It includes an adapter plate that allows the Odroid H4 to be easily adapted to the mini-ITX format, allowing the use of various cases and power supplies, ideal for industrial applications, home servers or multimedia centers.
zł126.06
24h
Available quantity: 2
Available
Available
USB IO board for Odroid computers, compatible with XU4, C1 +, C1, C0, C2 versions
zł74.03
24h
Available quantity: 2
Available
The oCam supports plug-and-play by UVC compliant adapting the standard M12 lens with focal length of 6mm