Qwiic Capacitive Touch Slider - CAP1203 capacitive touch sensor
ID: 581498
5906623420452
zł35.09
Tax included
zł28.53 tax excl.
Module with a capacitive touch sensor based on the CAP1203 chip. There are three touch panels on the board that can be used as separate sensors (pins CS1, CS2, CS3) or as a touch slider. I2C communication. SparkFun SEN-15344
Description
Module with a capacitive touch sensor based on the CAP1203 chip. There are three touch panels on the board that can be used as separate sensors (pins CS1, CS2, CS3) or as a touch slider. Each panel has a programmable sensitivity, so that the user can adjust it to his needs. It communicates via the I2C interface. Can be used e.g. as a power button or a gaming interface. On the product page there is a guide and the Arduino library.
Features
- 3 capacitive touch panels
- Emulated slider
- Programmable sensitivity
- Automatic recalibration
- I2C address: 0x28
- 2 x Qwiic connector
- Supply voltage: 3.3 V to 5 V
581498
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 3468
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 226
Available
No product available!
Available
Available
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
zł10.81
24h
Available quantity: 13
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł11.22
24h
Available quantity: 6
Available
Other products in the same category (16)
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
zł38.92
24h
Available quantity: 3
Available
The modules are used to operate 7 touch fields. This is possible thanks to the built-in AT42QT1070 capacitive touch sensor. The derived I2C interface serves for communication.
zł25.97
24h
Available quantity: 2
Available
Available
Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223
zł19.68
4 weeks
No product available!
Expansion module with touch buttons for the FRDM-KE16Z starter kit. NXP FRDM-TOUCH
Regular pricezł134.89zł69.00
24h
Available quantity: 3
Available
The module with a touch button can be used as a replacement for traditional mechanical buttons. It is based on the TTP223 chip, which measures the capacity of the field on the module
zł8.92
24h
Available quantity: 5
Available
Available
Touch button with blue LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
zł5.81
6 weeks
No product available!
Gravity: Digital Capacitive Touch Sensor is a capacitive touch sensor powered by 3.3V ... 5V voltage. DFRobot DFR0030
zł17.17
24h
Available quantity: 4
Available
Adafruit 2340
zł98.40
24h
Available quantity: 2
Available
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
zł19.90
24h
Available quantity: 442
Available
Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.
zł89.00
24h
Available quantity: 185
Available
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano. SB Components 21482
zł84.67
24h
Available quantity: 2
Available
Module with a touch keyboard (12 buttons) based on the ATtiny1616 microcontroller. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020636
zł27.37
24h
Available quantity: 2
Available
Touch button with green LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
zł6.17
24h
Available quantity: 19
Available
Touch button with red LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems
zł6.05
6 weeks
No product available!
Module with a capacitive touch sensor based on the CAP1203 chip. There are three touch panels on the board that can be used as separate sensors (pins CS1, CS2, CS3) or as a touch slider. I2C communication. SparkFun SEN-15344