Qwiic Cable - Breadboard Jumper (4-pin)
ID: 566110
5906623419814
zł10.20
Tax included
zł8.29 tax excl.
PRT-14425
Our offer includes a flexible cable with silicone insulation:
Qwiic 4-pin male cable with JST-SH plug, 150 mm (flexible)
Overview
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
The 28AWG wire’s length is 150mm (about 5.9 inches). The adapter’s wires have been color coded to red, black, blue and yellow. Additionally, the female Qwiic connector features a basic 1mm pitch, while the male hookup pins can easily insert into a standard 0.1" connector.
Note
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
Features
- Dimensions: 150mm (5.9") Length
566110
Data sheet
- Wtyk A
- JST-SH 1,0 mm
- Wtyk B
- Goldpin
- Number of cores/wires
- 4
- Cable length (cm)
- 15 cm
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
No product available!
Available
Available
Available
A small monochrome OLED display with a diagonal of 0.66 inches and a resolution of 64x48 pixels. Displays text in blue on a black background. It is equipped with an I2C interface and uses the popular SSD1306 driver. SparkFun LCD-22495
zł62.23
Delivery date unknown
No product available!
Other products in the same category (16)
2-core cable, 20 cm long, with JST PH plug (2mm pitch). The ends of the wires are isolated and tinned
zł1.70
24h
Available quantity: 118
Available
2-wire cable, 10 cm long, with a JST SH-1.0 female plug at one end
zł1.53
24h
Available quantity: 100
Available
Female-female cable, 16 cm long, with JST-SH 6-pin plug on both sides. Suitable for micro DC motor encoders with gear. Pololu 4766
zł14.85
24h
Available quantity: 5
Available
The connection cable (20 cm length) is terminated with a JST PH 2.0 2-pin plug and a flat (female) connector with a width of 2.8 mm
zł2.18
24h
Available quantity: 10
Available
2-wire cable, 10 cm long, with a JST PH-2.0 female plug at one end
zł1.53
24h
Available quantity: 250
Available
5-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends
zł2.10
24h
Available quantity: 12
Available
Available
4-wire cable, 30 cm long, with a JST PH-2.0 female plug at one end
zł1.89
24h
Available quantity: 11
Available
3-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends
zł1.83
24h
Available quantity: 95
Available
Qwiic to Grove adapter cable, 100 mm long. Enables interoperability between the SparkFun Qwiic Connect system and Seeed Studio I2C-based Grove boards. SparkFun PRT-15109
zł10.84
3 weeks
No product available!
Cable (adapter) STEMMA QT/Qwiic for Arduino MKR (ESLOV) 100 mm long. It enables interoperability between systems based on I2C SparkFun Qwiic and Adafruit STEMMA QT and Arduino MKR boards. Adafruit 4483
zł7.77
24h
Available quantity: 4
Available
A 150mm 2-wire cable terminated with a plug and socket JST SM2P.
zł1.89
24h
Available quantity: 92
Available
4-pin cable with JST SH connector compliant with STEMMA QT/Qwiic. Ended with alligator clips. Adafruit 4398
zł15.39
24h
Available quantity: 3
Available
2-pin cable, 20 cm long, terminated with a male JST XH2.5 plug and a female JST XH2.5 socket
zł2.13
24h
Available quantity: 13
Available
Cable with a length of 150 mm, on one side terminated with a female STEMMA QT (Qwiic) connector, and on the other side with single male goldpin connectors. Adafruit 4209
zł7.08
24h
Available quantity: 30
Available
6-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends
zł2.25
24h
Available quantity: 30
Available
PRT-14425