68RPM 6V N20F - miniature gear motor inverted
ID: 582320
5906623474363
zł27.60
Tax included
zł22.44 tax excl.
Small metal gear motor, rotation speed 68 RPM, operating voltage 6 V. GA1024-N20F-0036
Description
A small motor with a metal gearing with a D-shaped shaft, 3 mm in diameter and approx. 10 mm long. The recommended operating voltage of the motor is 6 V and at this voltage it achieves a speed of 68 RPM and a maximum torque of 1.4 kg * cm, consuming a current from 0.055 A to 0.58 A.
Features
- Motor type: medium power (MP)
- Gear ratio: 200:1
- Supply voltage: 3-9 V
- Speed: 68 RPM
- Maximum torque: 1,4 kg*cm
- Minimum current consumption: 0,055 A
- Maximum current consumption: 0,58 A
Attention!
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Overloading the motor can destroy the gearbox or shorten its service life. It is recommended not to exceed the load and 1 kg * cm. Do not block the motor shaft as this may damage the gearbox. It is recommended to supply the motors with a current equal to or less than 25% of the specified maximum current.
Supply voltage
The recommended supply voltage for the motors is 3 V, but the motors operate without problems in the range from 3 V to 9 V. It is possible to supply the motor with higher voltage, but it reduces the service life of the motor.
Dimensions and weight
All N20F engines have the same dimensions. The metal gear housing has two tapped holes for M1.6 bolts (1.6mm diameter, 0.35mm pitch). The engines weigh approx. 15 g.
 |
| Dimensions of N20F micromotors (units in mm). |
|---|
Types and parameters of N20F engines:
Our offer includes N20F engines with gear ratios from 50: 1 to 200: 1.
| Gear ratio |
Version | Voltage | Rotation speed | max. torque | min. current | max. current | Link |
| 50:1 | MP | 6 V | 381 RPM | 0,4 kg*cm | 55 mA | 0,58 A | LINK |
| 150:1 | MP | 6 V | 136 RPM | 1,1 kg*cm | 55 mA | 0,58 A | LINK |
| 200:1 | MP | 6 V | 68 RPM | 1,5 kg*cm | 55 mA | 0,58 A | LINK |
Motor controllers
It is not possible to control the motors directly from the microcontroller ports due to the high power consumption. This problem is solved by the motor drivers. Thanks to the controllers, it is possible not only to turn on and only the motors, but also to control their speed and direction of rotation.
Our offer includes a number of drivers for one or two motors. The drivers are available in the form of modules, shield extensions for Arduino and hat extensions for Raspberry Pi.
 |
 |
 |
| DC motor controller with DRV8838 Pololu system | Shield Arduino with dual driver for DC motors with A4990 chip | Dual driver for DC motors with the DRV8835 chip |
Current sensors
Current sensors measure how much current the motors are consuming at a given moment, which allows to determine the load on the motors. Our offer includes sensors with measuring ranges from ± 5 to ± 75.
 |
 |
 |
| Current sensor module 0-5A with ACS712-05 chip | Current sensor module ± 5A with ACS714 chip | Current sensor module ± 15.5A with ACS711EX system |
582320
Data sheet
- DC motor power
- MP
- Gear material
- Metal
- Gear ratio
- 200:1
- Rotation speed
- 68 RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 3 - 9 V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
Other products in the same category (16)
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł182.89
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.27
24h
Available quantity: 3
Available
Pololu high power miniature motor with carbon brushes. 100:1 gear motor, shaft speed is 330 rpm, torque 1.6 kg*cm (0.16 Nm). Pololu 3065
zł139.09
24h
Available quantity: 2
Available
Small metal gear motor, 300 RPM speed, 6V operating voltage. GA12-N20-0016
zł22.72
4 weeks
No product available!
Small metal gear motor, 15 RPM speed, 3V operating voltage. GA12-N20-0001
zł22.79
4 weeks
No product available!
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.31
24h
Available quantity: 2
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł127.18
24h
Available quantity: 2
Available
Small metal gear motor, 20 RPM speed, 6V operating voltage. GA12-N20-0010
zł29.80
24h
Available quantity: 7
Available
Pololu high power miniature motor with carbon brushes. 210:1 gear motor, shaft speed 85 rpm, torque 2.5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 3054
zł145.14
24h
Available quantity: 1
Available
A small medium-power motor with a 250:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 88 RPM speed and a maximum torque of 2.2 kg*cm. Pololu 2370
zł127.99
4 weeks
No product available!
Small metal gear motor, 100 RPM speed, 12V operating voltage. GA12-N20-0023
zł22.72
4 weeks
No product available!
A small, high-power motor with a 250: 1 metal gear, 6 V operating voltage, 0.1 A to 1.5 A power consumption, 130 RPM, a maximum torque of 3.2 kg * cm and carbon brushes with increased durability. Pololu 3068
zł139.15
4 weeks
No product available!
A small, high power motor with 380: 1 metal gear, 6 V operating voltage, 0.07 A to 1.6 A current consumption, 84 RPM, maximum torque 5.5 kg * cm and double-sided shaft. Pololu 4795
zł132.35
4 weeks
No product available!
A small, high-power motor with a 1000: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 35 RPM, a maximum torque of 10 kg * cm and carbon brushes with increased durability. Pololu 3046
zł197.57
4 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 2000 RPM, operating voltage 6 V. GA46-N20E-0051
zł41.77
4 weeks
No product available!
10:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł108.06
4 weeks
No product available!
Small metal gear motor, rotation speed 68 RPM, operating voltage 6 V. GA1024-N20F-0036