New products
New products
zł45.65
Delivery date unknown
zł39.75
Delivery date unknown
Available
J-Link Needle Adapter (8.06.04)
ID: 199557
5906623416615
zł521.14
Tax included
zł423.69 tax excl.
J-Link Needle Adapter - connect J-Link to a PCB, Segger
J-Link Needle Adapter (8.06.04)
J-Link Needle Adapter - connect J-Link to a PCB, Segger
The J-Link Needle Adapter has been designed to connect J-Link to a PCB which does not come with a mating connector or programming header. The designed pattern with 3 locating pins ensures, that the adapter can only be connected in one way.
The needle adapter allows manufacturers to save costs and space on their PCBs since there is no need to provide the PCB with additional connectors.
It adapts from the 20-pin 0.1 JTAG to a 10-pin needle connector.
J-Link Needle Adapter is compatible to J-Link, J-Link Pro, J-Link Ultra , J-Link EDU, Flasher ARM, Flasher RX and Flasher PPC.
Why to choose the J-Link Needle Adapter:
- No additional connector required on your PCB
- Very small footprint
- High reliability spring pins for secure connections
- Designed with 3 locating pins, so the adapter can not be connected the wrong way
- No external power supply required! The J-Link Needle Adapter comes with the option to power the target hardware via J-Link
These features make the J-Link Needle Adapter the perfect solution for debugging and production purposes.
Pinout
The pinout of the J-Link Needle Adapter is based on the pinout of the needle adapter by Tag-Connect. Please note, that both pinouts are not 100% identical since the J-Link Needle Adapter comes with a 5V-supply pin.
As you can see on the image below, the three locating pins ensure, that the adapter can not be connected to the PCB the wrong way. Moreover, the two "legs" on each side of the connector guarantee a stable and secure contact between pins and the PCB.
Download:
Code:
199557
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger
zł5,153.33
24h
Available quantity: 1
Available
No product available!
Flash Programmer for ARM and Cortex cores, Segger
zł4,101.91
24h
Available quantity: 1
Available
Flash Programmer for Renesas RX cores, Segger
zł3,179.97
Delivery date unknown
No product available!
Available
Other products in the same category (16)
J-Link 6-pin Needle Adapter (8.06.16)
zł545.42
24h
Available quantity: 3
Available
No product available!
An advanced tool that enables the integration of J-Link support into your own applications, used in both development environments and custom production tools. Supports debugging, flash programming, and application testing, offering support for Windows, Linux, and macOS, as well as compatibility with many programming languages via a DLL or shared library. Segger J-Link SDK (08.08.06)
zł10,528.97
3 weeks
No product available!
J-Link 19-pin Cortex-M Adapter, RoHS, Segger
zł169.33
24h
Available quantity: 2
Available
Power adapter providing a stabilized 5V supply voltage for the target board. Segger 5V Target Supply Adapter (8.06.29)
zł521.14
3 weeks
No product available!
The Segger J-Link Signal Smoothing Adapter (8/06/12) is designed to improve signal integrity between the J-Link debug probe and the target debug device. It allows JTAG signals to be suppressed by adjustable series resistors, preventing excessive gain and jitter.
zł260.56
3 weeks
No product available!
J-Link BASE upgrade to PLUS version, which provides new features and licenses, increasing debugging capabilities. With this update, users gain access to tools such as J-Flash, Ozone and Unlimited Flash Breakpoints license, ensuring full compatibility with a wide range of processors. Segger J-Link Upgrade BASE to PLUS (8.08.13)
zł1,559.52
3 weeks
No product available!
10-pin Needle Adapter to connect Flasher 5, Flasher ST7 or Flasher STM8 to a PCB, Segger
zł521.14
3 weeks
No product available!
A compact adapter that provides direct pin compatibility, allowing easy replacement of standard IDC cable without changing the pinout. It is designed to work with devices such as the J-Link PLUS Compact, J-Link BASE Compact and Flasher Compact, enabling flexible and efficient debugging and programming configurations in embedded systems. Segger Right Angle (RAFF) Adapter (8.06.32)
zł256.43
3 weeks
No product available!
AVR PDI adapter from standard 2.54mm 20 pin connector to 2.54mm 6 pin, 1.27mm 6 pin or 2.54mm 10 pin AVR PDI connector. Segger AVR PDI Adapter (8.06.26)
zł361.60
3 weeks
No product available!
Adapter from the standard 20-pin 2.54 mm connector to the 10-pin 1.27 mm connector often used in Cortex-M boards. Segger 50-Mil 10-Pin Patch Adapter (8.06.28)
zł255.25
3 weeks
No product available!
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
zł1,051.37
3 weeks
No product available!
The Segger J-Link Microchip Adapter (8/06/09) provides a debug connection between a J-Link probe and hardware with Microchip PIC32 series microcontrollers. Supports RJ12 debug connector, 14-pin MIPS connector and 6-pin PICkit connector.
zł255.25
3 weeks
No product available!
A set of three adapters for SO-8, SO-8W and SO-16 memories that allows easy testing and programming of flash devices in these packages, eliminating the need for dedicated solutions for each form factor. The adapters are compatible with the SEGGER (Q)SPI Flash Evaluator and other test systems, making them a versatile tool for both test and production. SEGGER (Q)SPI Flash Evaluator Adapter Board Pack for SO-8, SO-8W, SO-16 (6.40.01)
zł617.53
3 weeks
No product available!
A power adapter that provides a stabilized supply voltage to the target board (can be adjusted from 3.6V to 0.8V). Segger Target Supply Adapter (8.06.18)
zł361.60
3 weeks
No product available!
The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the Intel FPGA 10-pin JTAG connector, enabling debugging of FPGA-based MCU cores such as the dual-core Arm Cortex-A9 in Cyclone V devices. on Intel FPGA solutions.
zł287.82
3 weeks
No product available!
J-Link Needle Adapter - connect J-Link to a PCB, Segger