

zł341.45 tax excl.
A debugger/programmer that enables rapid prototyping and programming of all Microchip devices, including PIC microcontrollers (MCUs) and dsPIC digital signal controllers (DSCs), AVR and SAM devices, and Arm Cortex-based microprocessors (MPUs). Microchip PG164150
The MPLAB PICkit 5 is a debugger/programmer that enables rapid prototyping and programming of all Microchip devices, including PIC microcontrollers (MCUs) and dsPIC digital signal controllers (DSCs), AVR and SAM devices, and Arm Cortex-based microprocessors (MPUs). It works with the MPLAB X integrated development environment (IDE) to provide a powerful and easy-to-use graphical user interface (GUI) for debugging and development. Alternatively, it can be used standalone with the MPLAB Programmer-to-Go (PTG) mobile app, allowing you to connect to the tool from your smartphone via Bluetooth. With self-contained programming features accessible from a smartphone, the MPLAB PICkit 5 is a comprehensive development tool that allows you to prototype and debug, then unplug and take the device with you to deploy to your target device.
The MPLAB PICkit 5 supports a wide range of interfaces such as four-wire JTAG or Serial Wire Debug (SWD) with a virtual UART communication port (VCP), and with the debugger adapter card (AC102015) it can use standard JTAG, SWD, ICSP and AVR protocols. Thanks to its unique feature, the PICkit 5 can also be powered by the target board and program by pressing the button hidden under the logo. You can also connect via Bluetooth using the MPLAB PTG mobile app and view the micro SDTM card installed in the tool and start target board programming directly from the app.
A debugger/programmer that enables rapid prototyping and programming of all Microchip devices, including PIC microcontrollers (MCUs) and dsPIC digital signal controllers (DSCs), AVR and SAM devices, and Arm Cortex-based microprocessors (MPUs). Microchip PG164150
Universal programmer for EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory. It is controlled from a computer via USB interface and Windows software. XGecu T48
Universal programmer for serial EEPROM and Flash memories, including AVR, STM32 and STM8 microcontrollers. It is controlled from a computer using a USB interface and software for Windows systems, but it can also operate autonomously without a computer. SkyPRO II
Advanced new generation universal programmer, offering ultra-fast operation thanks to USB 3.0 Type-C, 200 MHz processor and Xilinx SP6 FPGA. It supports over 26,000 devices (including NAND, EMMC, BIOS), allows operation with voltages from 1.2 V and offers ISP function for in-circuit programming. Thanks to its compact design, Polish software and free updates, it is an ideal tool for both service and industrial applications. XGecu T76
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. CH341
Memory adapter in SOP8 and DIP8 housings working with a voltage of 1.8 V dedicated to TL866CS/TL866A programmers
MPLAB PICkit Basic – Affordable programmer/debugger for PIC, AVR, dsPIC, and ARM Cortex microcontrollers with USB-C and SWD support. Microchip PG164110
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. modCH341set2
Universal EEPROM and Flash (I2C and SPI) serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. EZP2019
Replacement adapter for SWIM and ICC connections allowing programming and debugging of STM8 and ST7 microcontrollers with RLink
The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889
Universal EEPROM, PROM, NVRAM, SPLD, CPLD, EPLD and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. Xeltek Superpro 610P
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. modCH341set1
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. SkyPRO
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
No product available!
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. EZP2010
A debugger/programmer that enables rapid prototyping and programming of all Microchip devices, including PIC microcontrollers (MCUs) and dsPIC digital signal controllers (DSCs), AVR and SAM devices, and Arm Cortex-based microprocessors (MPUs). Microchip PG164150