DFRobot engine with 75: 1 6V gearbox and plate with PH 2.0 connector
ID: 562489
zł79.04
Tax included
zł64.26 tax excl.
Compact engine with 75: 1 LP transmission, shaft speed is 290 rpm, torque is 0.8 kg * cm (0.08 Nm), plate with connector PH 2.0. DFRobot FIT0457
Description
DC motor equipped with a metal transmission ratio of 75: 1. The motor of the set is designed to supply with 6 V voltage and generates a torque of 0.8 kg * cm (0.08 Nm). The current consumed by the unloaded motor is about 70 mA, while the maximum current drawn under the load is 1000 mA. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the assembly of the further part of the drive system. The motor has a PCB with a PH 2.0 connector soldered to the connectors.
properties
- Nominal engine operating voltage: 6V
- Nominal current of the unloaded motor: 70 mA
- Nominal current of the motor loaded: 1000 mA
- Nominal engine speed at 6V: 290 rpm
- Metal gear ratio: 75: 1
- Plate with connector PH 2.0
- Weight: 15 g
Included
- DFRobot engine with 75: 1 6V transmission
- The cable from both sides ends with a PH-2.0 plug
- Cable on one side terminated with a PH-2.0 plug
562489
Data sheet
- DC motor power
- LP
- Gear material
- Metal
- Gear ratio
- 75:1
- Rotation speed
- 290RPM
- Shaft diameter
- 3 mm
- Shaft shape
- D
- Obustronny wał silnika
- Nie
- Power supply voltage
- 6V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
A set of two white plastic brackets for mounting miniature Polol motors. Mounting screws and nuts included. Extended version. Pololu 1089
zł20.16
24h
Available quantity: 5
Available
Pololu Universal Aluminum Mounting Hub for 3mm Shaft Pair, 2-56 Holes
zł44.65
24h
Available quantity: 1
Available
A set of two black plastic brackets for mounting micro Pololu motors. Mounting screws and nuts are included. Pololu 989
zł13.04
24h
Available quantity: 10
Available
A set of two white plastic brackets for mounting micro Pololu motors. Mounting screws and nuts are included. Pololu 1086
zł12.63
24h
Available quantity: 4
Available
Other products in the same category (16)
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 200 RPM, operating voltage 6 V. GA1036-N20M-0056
zł29.82
6 weeks
No product available!
Small motor with metal gear and encoder, rotation speed 30 RPM, operating voltage 6 V. GA46-N20E-0042
zł38.65
6 weeks
No product available!
Small metal gear motor, 200 RPM speed, 6V operating voltage. GA12-N20-0015
zł22.72
6 weeks
No product available!
Miniature high-power motor from the Pololu MP series. The 210: 1 gear motor, shaft speed is 100 rpm, the torque is 2.6 kg * cm (0.26 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2383
zł117.16
6 weeks
No product available!
Miniature, 6V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4785
zł145.95
24h
Available quantity: 4
Available
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
zł123.27
24h
Available quantity: 3
Available
Small metal gear motor, 300 RPM speed, 6V operating voltage. GA12-N20-0016
zł22.72
6 weeks
No product available!
Small metal gear motor, rotation speed 68 RPM, operating voltage 12 V. GA1218-N20W-0039
zł36.70
24h
Available quantity: 4
Available
Pololu high power miniature motor with carbon brushes. 380:1 gear motor, shaft speed 85 rpm, torque 5kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 4799
zł143.57
24h
Available quantity: 4
Available
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
zł148.83
24h
Available quantity: 2
Available
A small, low-power motor with a 150:1 metal gear, operating voltage of 6 V, power consumption from 0.02 A to 0.36 A, speed of 90 RPM, maximum torque of 1.1 kg*cm and double-sided shaft. Pololu 2205
zł132.35
6 weeks
No product available!
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł42.96
24h
Available quantity: 3
Available
50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł117.17
24h
Available quantity: 3
Available
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 6 V: 290 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.7 A at stall.
zł121.23
24h
Available quantity: 2
Available
100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
zł117.16
24h
Available quantity: 1
Available
Small motor with metal gear and encoder, rotation speed 60 RPM, operating voltage 6 V. GA46-N20E-0044
zł41.91
6 weeks
No product available!
Compact engine with 75: 1 LP transmission, shaft speed is 290 rpm, torque is 0.8 kg * cm (0.08 Nm), plate with connector PH 2.0. DFRobot FIT0457