New products
New products
zł103.20
24h
Available
zł245.27
6 weeks
zł256.05
6 weeks
zł264.82
6 weeks
Available
NeoTrellis RGB Driver PCB - 4x4 keyboard with illuminated buttons
ID: 572768
5906623429837
zł71.61
Tax included
zł58.22 tax excl.
Mini keyboard with 16 buttons and RGB backlight. Equipped with a connector compatible with Grove, it communicates via the I2C interface. Adafruit 3954
Description
Mini keyboard with 16 buttons and RGB backlight. Equipped with a connector compatible with Grove, it communicates via the I2C interface. The device address is configured with 5 jumpers, which allows you to connect them with each other and control up to 32 modules on one bus. It is characterized by high reliability, and the LED backlight gives the keyboard an amazing look. It will work as an element of the user interface, e.g. a control panel. Full documentation with examples is available on the product page.
Features
- 16 keys (4x4 matrix)
- RGB LEDs for each button
- I2C interface
- Configured I2C address from 0x2E to 0x4E
- Can be combined into larger panels
- Dimensions: 60 x 60 x 7.5 mm
- The connector is compatible with Grove
572768
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
Qwiic to Grove adapter cable, 100 mm long. Enables interoperability between the SparkFun Qwiic Connect system and Seeed Studio I2C-based Grove boards. SparkFun PRT-15109
zł10.84
Delivery date unknown
No product available!
Mechanical mini keyboard with 16 buttons and backlight. Based on the RP2040 chip, it uses Kailh Speed Gold buttons. Pimoroni PIM565
zł295.37
24h
Available quantity: 1
Available
Mechanical mini keyboard with 16 buttons and backlight. Based on the RP2040 chip, it uses Kailh Speed Silver buttons. Pimoroni PIM561
zł324.87
24h
Available quantity: 1
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
Delivery date unknown
No product available!
Other products in the same category (16)
Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223
zł19.68
4 weeks
No product available!
Module with a button, LED diode and a green cap. DFRobot DFR0029-G
zł11.29
24h
Available quantity: 2
Available
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
zł19.90
24h
Available quantity: 442
Available
Module with 12-position rotary switch. It is supplied with the voltage ranging from 3.3 V to 12 V and has an analog output (Gravity connector). DFRobot SEN0156
zł24.30
24h
Available quantity: 2
Available
Touch keyboard module with 16 buttons based on the TTP229 chip. It is equipped with a connector with derived signals and a power supply diode
zł9.43
6 weeks
No product available!
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
zł4.00
24h
Available quantity: 20
Available
Keyboard module with 10 tact switch buttons. The state of the buttons can be read using digital pins or a common analog output. DFRobot DFR0792
zł16.31
24h
Available quantity: 2
Available
Touch keyboard module with 4 buttons based on the TTP224 system. It is equipped with a connector with derived signals and 4 LEDs signaling the state of each button
zł5.76
24h
Available quantity: 3
Available
Module with a button, LED diode and a blue cap. DFRobot DFR0029-B
zł11.30
24h
Available quantity: 3
Available
Waveshare 8 Push Buttons module provides 8 single push buttons in 1 board. Waveshare 3678
zł7.27
24h
Available quantity: 10
Available
Touch keyboard module with 8 buttons and one line sensor (slider)
zł47.23
24h
Available quantity: 3
Available
Module with a button and RGB LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020049
zł20.91
6 weeks
No product available!
Module with a bistable button and red LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-R
zł18.86
24h
Available quantity: 3
Available
Available
The 4x4 Membrane Keyboard Module with 16 Buttons is compatible with Raspberry Pi, Arduino, AVR and other microcontrollers. It is lightweight, durable and easy to assemble, making it ideal for various electronics projects. ModKB4x4
zł2.93
24h
Available quantity: 15
Available
Module with a button, LED diode and a red cap. DFRobot DFR0029-R
zł8.38
24h
Available quantity: 2
Available
Mini keyboard with 16 buttons and RGB backlight. Equipped with a connector compatible with Grove, it communicates via the I2C interface. Adafruit 3954