

Module with a 2-channel inductive sensor LDC1612 based on a 28-bit inductive-digital converter (LDC). Inductance is a phenomenon caused by the magnetic field of a conductive conductor. The sensor detects the presence of conductors in the environment, especially metals. It is used, among others as elements of buttons and keyboards in consumer devices and in industry. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
Grove adapter for 3.5mm screw connector. Seeed Studio 103020007
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
No product available!
The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046
Module with 6-position DIP switch. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 111020043
No product available!
Module with a MLX90641 thermal imaging camera with a 16x12 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020892
Starter kit with nRF52840-MDK evaluation board and Grove modules designed for the development of Mesh networks. Seeed Studio 110061007
Module with the SLA-05VDC-SL-C relay with a maximum load of 30 A. The board is equipped with a Grove connector and is controlled by a digital signal. Seeed Studio 103020012
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
The module with the MCP9600 amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020594
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020173
Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022
Module with a humidity sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020018
Grove module with FSR402 pressure sensor. The board is equipped with a Grove connector with an analog output. Seeed Studio 101020553
No product available!
Module with a button and blue LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020046
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599