KAmodRPi UART RS485 ISO Transceiver RS485 with Galvanic Isolation for Raspberry Pi
ID: 1187255
5906623433384
zł67.70
Tax included
zł55.04 tax excl.
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
Description
The KAmodRPi UART RS485 ISO is an RS485 bus transceiver controlled from a UART interface, compatible with the Raspberry Pi SBC family. On the RS485 bus side, the MAX13487 chip is used, which features automatic transmission direction control. This solution requires only 2 signals - RXD and TXD for proper, two-way communication using the standard UART interface. The control signals are connected through circuits providing galvanic separation. Additionally, the module is equipped with surge protection on the RS485 bus lines and allows the connection of a 120 Ω resistance serving as a terminator for the RS485 bus.
Features
- RS485 bus transceiver module controlled from a UART interface
- RS485 bus transceiver type MAX13487
- Automatic switching between transmitting/receiving data
- Only 2 signals RXD and TXD required for proper two-way communication (TX ENABLE signal not required)
- Half-duplex communication
- Transmission speed - max 500 kbps
- Number of modules that can be attached to the bus - max 128
- Independent power supply for RXD and TXD line circuits, allowing cooperation with systems operating at 2.0-5.5 V (no additional voltage translators required)
- Transmit/receive data indication - LED diodes
- Included 120 Ω resistance (RS485 bus terminator)
- Option to block data reception (RXD signal blocking)
- Galvanic separation up to 1 kV
- Surge protection on RS485 bus lines
- RS485 bus connector type Phoenix Contact MC 3.81 mm
- 5 V power supply through a connector in RPi Zero standard or goldpin headers
- Maximum current consumption 100 mA
- Operating temperature: -40°C ~ 85°C
- Board and connector in Raspberry Pi Zero standard
- Dimensions: 65 mm x 30 mm x 20 mm
Included in the set
- KAmodRPi UART RS485 ISO module
- Set of screws and spacers for mounting the overlay on the Raspberry Pi board
1187255
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
Raspberry Pi 5 - 16GB RAM, 2,4GHz, WiFi DualBand, Bluetooth, PCIe 2.0, 2x CSI/DSI, 2x USB 3.0, 2x...
Minicomputer version 5 with 16GB RAM equipped with two microHDMI ports, 2 USB 3.0 ports and 2 USB 2.0 ports and a USB-C power connector. The processor is a 4-core Broadcom BCM2712 clocked at 2.4GHz. The board also has dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface and a real-time clock. This model offers exceptional performance thanks to 16GB RAM, which makes it perfect for advanced applications
zł589.02
24h
Available quantity: 140
Available
Other products in the same category (16)
Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.
zł78.15
24h
Available quantity: 147
Available
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł84.85
24h
Available quantity: 4
Available
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
NVMe Base is a reliable solution for expanding storage for the Raspberry Pi 5, ideal for users who require fast data access and large storage capacity. With support for multiple NVMe SSD models and compatibility with the Raspberry Pi 5, it is the perfect addition to projects that demand performance and flexibility. Pimoroni PIM699
zł67.98
Delivery date unknown
No product available!
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
zł294.19
24h
Available quantity: 20
Available
The PCIe To USB 3.2 Gen1 HAT for Raspberry Pi 5 is a versatile solution that expands the USB capabilities of your Raspberry Pi 5. With easy installation and power monitoring features, it is an ideal choice for projects requiring multiple high-speed USB ports. Additionally, the reserved space for a cooling fan ensures better cooling and stable operation of the device. Waveshare 26847
zł82.36
24h
Available quantity: 2
Available
4 Port USB HUB HAT for Raspberry Pi B+, Raspberry Pi 2 B, Rapsberry Pi 3 B; USB to UART Onboard. Waveshare USB HUB HAT
zł35.36
24h
Available quantity: 8
Available
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
zł132.80
Delivery date unknown
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
zł1,244.03
24h
Available quantity: 1
Available
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
zł2,086.85
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł109.90
24h
Available quantity: 24
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł109.88
24h
Available quantity: 3
Available
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł55.90
24h
Available quantity: 199
Available
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
zł102.90
24h
Available quantity: 1
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 1
Available
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption