zł12.90
Flying Wire Adapter (8.06.27)
ID: 1189737
zł355.88
Tax included
zł289.33 tax excl.
An adapter that allows you to connect a 20-pin 0.1" connector to a 10-pin connector, allowing you to easily connect J-Link or Flasher programmers to your PCB using through-wires. It is ideal for prototyping, testing new designs and working with ST Discovery boards, offering flexibility, speed and time savings when making design changes.Segger Flying Wire Adapter (06.08.27)
Description
The Flying Wire Adapter enables the connection of a standard 20-pin 0.1'' connector to a 10-pin connector, allowing J-Link or Flasher programmers to be connected to a PCB using flying wires. This solution is especially useful in hardware prototypes where the final connector has not yet been chosen. The Flying Wire Adapter is also very helpful during testing and diagnostics of new designs, where speed and flexibility are crucial.
The adapter is also an ideal choice for manually connecting to ST Discovery boards, enabling easy and quick connections with circuits. Thanks to its versatility and simplicity, the Flying Wire Adapter is an indispensable tool in the process of creating and testing prototypes. The flexible connections allow for quick changes in the design without needing to alter the entire hardware configuration, saving a significant amount of time. The product works excellently in both laboratory and production environments where precision and turnaround time are critical.
Features
- Converts a 20-pin 0.1'' connector to a 10-pin connector
- Enables connection using flying wires
- Ideal for working with hardware prototypes where the connector has not yet been finalized
- Useful for manual connections to ST Discovery boards
- High flexibility and ease of use in various configurations
- Dimensions: 114.3 x 127 x 12.7 mm
1189737
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
You might also like
Hi-Speed JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł4,099.82
24h
Available quantity: 2
Available
Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger
zł5,153.33
24h
Available quantity: 1
Available
JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł3,106.68
24h
Available quantity: 2
Available
Other products in the same category (16)
An adapter that allows the J-Link device to connect to Microchip microprocessors that use an RJ11 debug connector, converting the standard 20-pin .1" connector to a 6-pin RJ11 connector. With this tool, users can take full advantage of 2-wire JTAG debugging capabilities, including process tracing, memory analysis, and real-time device control, and the 21 cm RJ11 cable provides convenience in connecting to the target system. Segger Microchip 2-Wire JTAG TDI Adapter (06/08/23)
zł256.43
3 weeks
No product available!
Adapter that enables JTAG connection between devices such as J-Link, J-Trace or Flasher and Jacinto7 systems from TI, offering access to JTAG/SWD and Trace connectors with TPIU tracking function. Thanks to high quality of workmanship and versatility, the adapter provides a stable connection, supporting debugging, testing and diagnostic processes in embedded systems. Segger MIPI-60 Adapter (8.06.42)
zł512.87
3 weeks
No product available!
The Segger J-Link Mictor 38 Adapter allows connection to a 38-pin Mictor connector in accordance with the ARM "ETM" specification. The adapter connects the GND and JTAG pins to the 20-pin J-Link, and the trace pins on the Mictor connector are not used.
zł787.02
3 weeks
No product available!
Adapter enabling connection of Flasher PRO programmers and other Flasher models to devices with a 10-pin Renesas connector. It is compatible with M16C, M32C, R8C and R32C microcontrollers, providing stable communication and easy integration with older and modern programming systems. Segger Renesas M16C Family 10-Pin Adapter (8.06.40)
zł259.00
3 weeks
No product available!
A compact reference platform that enables rapid testing and verification of trace configurations, providing excellent signal quality for analysis. With the ST STM32H743 microcontroller and support for JTAG, SWD and SWO debugging interfaces, the board provides high performance and flexibility in monitoring system performance. Segger STM32H7 Trace Reference Board (6.68.20)
zł1,036.19
3 weeks
No product available!
J-Link 19-pin Cortex-M Adapter, RoHS, Segger
zł169.33
24h
Available quantity: 2
Available
A specialized demonstration board designed to support Tail Tagging within the embOS/IP IP stack. Using this technology, it is possible to transform a single Ethernet port into several logical ports, enabling the creation of a virtual multiport network using only a single Ethernet port. Segger embOS/IP Switch Board (6.70.00)
zł512.87
3 weeks
No product available!
An adapter that converts a standard 20-pin 2.54 mm connector to a 10-pin 2.54 mm connector. It enables the connection of Segger programmers with Silicon Labs devices and development boards with a C2 interface. Segger SiLabs C2 Adapter (8.06.17)
zł361.60
3 weeks
No product available!
A module that enables precise switching of Flasher signals in production environments, preventing interference between test devices connected to the same lines. By controlling relays via VTSUPPLY, it ensures stable and reliable operation in testing and programming processes. Segger Relay Adapter (8.06.41)
zł1,036.19
3 weeks
No product available!
The Segger J-Link USB Isolator (8.07.02) provides isolation up to 3 kV DC and supports USB Full-Speed transmission with a maximum output current of 200 mA. The device is equipped with short-circuit protection and LED indicators for power status and overload.
zł787.02
3 weeks
No product available!
Advanced evaluation board designed for rapid implementation of embedded solutions. Supporting the embOS operating system and SEGGER tools such as emFile, emWin, emUSB and emNet, the board is an ideal platform for software testing and application development in an environment based on the Xilinx Zynq XC7Z007S SoC with ARM Cortex-A9 processor and Artix7 FPGA. Segger emPower Zynq (6.31.00)
zł512.87
3 weeks
No product available!
The Segger J-Link Supply Adapter (8.06.14) allows you to manually set the debug probe I/O voltage, preventing damage to the target board, adjustable from 1.2V to 5.0V. It can be inserted between J-Link or Flasher and the target device, reducing the number of connections needed, which is especially useful in a production environment.
zł361.60
3 weeks
No product available!
Adapter that converts standard 20-pin 2.54 mm connector to SWIM connector and 10-pin connector. Used for programming STM8 chips. Segger STM8 Adapter (8.06.22)
zł260.56
3 weeks
No product available!
The RX FINE adapter converts a standard 20-pin 2.54 mm connector to a 14-pin 2.54 mm connector. It enables the connection of Segger programmers with RX devices from Renesas. Segger RX Fine Adapter (8.06.10)
zł260.56
3 weeks
No product available!
The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the Intel FPGA 10-pin JTAG connector, enabling debugging of FPGA-based MCU cores such as the dual-core Arm Cortex-A9 in Cyclone V devices. on Intel FPGA solutions.
zł287.82
3 weeks
No product available!
Power adapter providing a stabilized 5V supply voltage for the target board. Segger 5V Target Supply Adapter (8.06.29)
zł521.14
3 weeks
No product available!
An adapter that allows you to connect a 20-pin 0.1" connector to a 10-pin connector, allowing you to easily connect J-Link or Flasher programmers to your PCB using through-wires. It is ideal for prototyping, testing new designs and working with ST Discovery boards, offering flexibility, speed and time savings when making design changes.Segger Flying Wire Adapter (06.08.27)