

zł97.48 tax excl.
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard, which means it can transfer data at higher speeds than traditional CAN networks. It is equipped with a Microchip MCP2542FD FD CAN transceiver, which is responsible for the physical layer of the CAN network and provides the necessary connection between the device and the network. The converter can support baud rates up to 8 Mbps and provides hardware frame filters that allow selective frame reception, which is useful for large CAN networks. The device can run on Windows, however, a Windows Subsystem for Linux (WSL) environment may be required for full functionality.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland [email protected] 22 767 36 20
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0
2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
RS485 CAN HAT is an extension designed for the Raspberry Pi mini-computer in the form of a HAT overlay. Adds RS485 and CAN interfaces for the Raspberry Pi plate. Interface signals are derived as screw and goldpin connectors. RS485 CAN HAT
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
No product available!
USB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
No product available!
An extensive CAN to Ethernet converter adapted to difficult industrial conditions. It supports two CAN interfaces, one Ethernet interface and a TCP/IP protocol stack. It also has one RS485 serial port. USR-CANET200
Industrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH
CANable V2.0 PRO is a USB-C to CAN adapter with galvanic isolation. It supports CAN 2.0 and CAN FD, ensuring reliable communication and broad compatibility. MKS CANable V2.0 PRO
No product available!
TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter
I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111
Expansion board for XIAO, enabling easy CAN Bus communication by integrating MCP2515 and SN65HVD230. Ideal for applications in vehicles, industrial control systems and robotics, it provides reliable data exchange and easy integration into the XIAO ecosystem. Seeed Studio 105100001
2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface
USB - LIN bus converter module. It allows you to connect devices to your computer via the LIN bus. LIN USB CONVERTER (LUC)
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter